WinOLS 4.51 VMWARE+ecm TITANIU+immo too+ ecu remapping lessons With Plugins Auto ECU Chip Tuning Software
WinOLS 4.51 With Plugins Auto ECU Chip Tuning Software VMWARE+ecm TITANIU+immo too+ ecu remapping lessons
WinOLS 4.51
|
ATTENTION!!!! MAKE SURE YOUR PC CAN RUN VMWARE SOFTWARE V15 or v16
IT IS THE CUSTOMERSRESPONSIBILITYTO MAKE SURE YOUR PC CAN RUN VMWARE BEFORE YOU PURCHASE THIS PRODUCT.
IF YOU PURCHASE THIS PRODUCT AND YOUR PC DOES NOT RUN VMWARE WE DO NOT OFFER A REFUNDBECAUSETHIS IS A DIGITAL PRODUCT.
|
YOU WILL RECIVE DOWNLOAD LINK
YOU CAN RUN WINOL 38 TIMES AND NEED TO RESET IT OR IF YOU SUSPEND VIRTUAL MACHINE DON´T NEED RESET ANYMORE
Instant Delivery by private message and email.
Your are only buying SOFTWARE not the interface or cable etc... WINOLS ONLY
Requirements
As long as your pc can run vmware and a virtual machine it will work.
It doesnt matter what operating system you are using.
Full install instructions will be sent by private message instantly on where to get vmware plus our virtual machine with diagbox already installed on it, all you need to do is install vmware (takes 2 minutes) then open the virtual machine using vmware and its ready to go.
Its a very basic setup. No long installs.
any questions please message me before
DO NOT ACCEPT RETURNS FULLY WORKIN SOLUTION
NO RETURNS
EASY SETUP!
WinOLS 4.50 on VMware
Program is installed on a VMware virtual machine and is ready to use.
After 37 launches of the program, you need to reinstall the virtual machine, or just pause it and reinstall nothing, the virtual machine will work forever.
Clear instructions and all additional software required for installation are included.
Windows Supported: 10, 8, 7. For VMware Workstation need at least intel core i3 processor and 4 GB of RAM and enabled virtualization in BIOS (in 99% of cases it is turned on, but before you buy it is better to check in advance if you have not used virtual machines on this PC and just turn it on).
Feel free to contact me to ask questions.
Help will be provided Free Of Charge via TeamViewer connection for those who has difficulty with installation.
If you have not used the VMware Workstation program yet and you have doubts, do not hesitate to write me in a personal message only the word "VMware" and I will send you documentation on installing and configuring the program along with the trial virtual machine. Absolutely free.
Refunds are not possible for this listing after receiving download links as it is possible to help install the program via the Teamviewer. If we cannot help you install the program, we will gladly refund your money without delay. So it will be fair.
HERE IS THE 2020 NEW DOMAS. ZIP FILES IS ABOUT 7GB. AFTER extract you can get about 42GB files.
this is 2021 damos. about 6.37GB AFTER EXTRACT.
NEW VERSION ECM TITANIUM 1.61 with 26000 DRIVER
Language:Italian, English, Portuguese, German, French, Spanish
ECM TITANIUM allows you to accurately and easily, autonomous and completely safe to interpret the files that are contained inside the motor controller.
Through the use of Driver which true "contents" pose for reading the files contained in the control units, you can easily find the data stored in the file maps
and the main rev limiter to increase the engine power, or simply the consumer to optimize.
and the main rev limiter to increase the engine power, or simply the consumer to optimize.
Driver
The outstanding component of this product are its drivers the latest Generation. They offer a well-structured and functional powerful interface to create and manage projects in terms of the machined in ECM Titanium files.
After the file contained in the memory of the control unit has been read, it is enough to load it. Then the software starts a search to check the presence of compatible drivers both in our personal as well as in the online database.
Thanks to the studies of our developers, allows the software about to act directly on the main areas: control of air-fuel ratio, engine torque, injection system, Rail, Turbo and many other options are available.
After the file contained in the memory of the control unit has been read, it is enough to load it. Then the software starts a search to check the presence of compatible drivers both in our personal as well as in the online database.
Thanks to the studies of our developers, allows the software about to act directly on the main areas: control of air-fuel ratio, engine torque, injection system, Rail, Turbo and many other options are available.
Table View
The tabular representation of the data contained in the data read from the controller file is the easiest, fastest and most understandable way to interpret the values to increase or decrease.
By clicking on the desired map, the main screen is replaced by a table that was created by crossing existing on the two axes parameters. So you can Nm,
Bar and mm3, intervene directly in the physical map information, for example.
By clicking on the desired map, the main screen is replaced by a table that was created by crossing existing on the two axes parameters. So you can Nm,
Bar and mm3, intervene directly in the physical map information, for example.
2D View
The data is converted in 2D graphs. Through this graphical representation, you can try to optimize the existing data in the engine control unit and act on only one of the maps contained in the Driver,
only one byte, on any map or on a specified inside the file.
only one byte, on any map or on a specified inside the file.
3D View
The new 3D-graphics engine allows you to interact with the data in an existing driver map. You can zoom the values directly from the graph window, rotate and edit.
Hexadecimal view
All files of the engine control unit have a hexadecimal structure. This numerical representation system is extremely common due to the
direct relationship of a hexadecimal number with four binary digits in the computer science. By this hexadecimal window of ECM Titanium, you can interpret the file structure and
direct relationship of a hexadecimal number with four binary digits in the computer science. By this hexadecimal window of ECM Titanium, you can interpret the file structure and
Editing.
Checksum
It is a bit sequence that is used for checking the completeness of the data. Every time you interact with a single bit, interpreted and automatically corrects ECM Titanium the control sequence.
Therefore, a successful course is guaranteed, no matter whether you work in real time or whether you need to send a file to your slave.
Therefore, a successful course is guaranteed, no matter whether you work in real time or whether you need to send a file to your slave.
Winols damos file:
winols learning video:
winols PDF learning user manual:
All you need for starting remapping cars in one. Remapping softwares - EGR DPF OFF software's (winols,ecmtitanium,ecu safe) more than 100 videos + guides for winols and ecmtitaniumstep by step (avi,pdf) damos and tuned files pack.
Pack include
WinOls 4.26 LATEST VERSION ON VIRTUAL MACHINE
Pack include
WinOls 4.26 LATEST VERSION ON VIRTUAL MACHINE
ECMTitanium1.61
ECU Safe 1.9.3.0
VAG EDC15 immo bypass
VAG EDC16 immo bypass
Checksum corrector ultimo
DAMOS & TUNED FILES PACK - 13GB
REMAPPING GUIDES:
Custom-mapping Digifant-1.pdf
EDC15_rev1.3.pdf
m1.5.5.pdf
Magneti_Marelli_6JF_Tuning_Guide_1.2.pdf
Motronic 1.7 guide.pdf
Motronic checksum correction.pdf
Motronic3.1.pdf
MSA-11.pdf
MSA15 tuning guide.pdf
Siemens MS41 Tuning Guide.pdf
Volvo 850 T5.pdf
remap step by step_petro_nom_turbo.pdf
remap step by step_petro_turbo.pdf
Siemens MS41 Tuning Guide.pdf
ECU Safe 1.9.3.0
VAG EDC15 immo bypass
VAG EDC16 immo bypass
Checksum corrector ultimo
DAMOS & TUNED FILES PACK - 13GB
REMAPPING GUIDES:
Custom-mapping Digifant-1.pdf
EDC15_rev1.3.pdf
m1.5.5.pdf
Magneti_Marelli_6JF_Tuning_Guide_1.2.pdf
Motronic 1.7 guide.pdf
Motronic checksum correction.pdf
Motronic3.1.pdf
MSA-11.pdf
MSA15 tuning guide.pdf
Siemens MS41 Tuning Guide.pdf
Volvo 850 T5.pdf
remap step by step_petro_nom_turbo.pdf
remap step by step_petro_turbo.pdf
Siemens MS41 Tuning Guide.pdf
Stage values.pdf
and many more pdf and video guides
and many more pdf and video guides
IMMO SERVICE TOOL V1.2 PIN Code and Immo off Works support Multi-brand support more ECU model
support ECU model list:
